Serving the Chicago area  ·  (872) 242-4810  ·  Open Mon-Sun 7am-7pm
📞 (872) 242-4810 Free Quote

Metal Roofing in Arlington Heights, IL (60004) · Local Professionals

Chicago Metal Roofing · Fast response in Arlington Heights and the Chicago area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+340Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Arlington Heights is classic northwest Cook County: mid-century brick ranches and Cape Cods on tidy lots, with mature maples and elms that drop limbs on roofs every time a front rolls through. The housing stock around 60004 was built to last, but the original low-slope roofs and worn flashing are now decades old, and ice dams at the eaves are a familiar winter headache.

That's where Chicago Metal Roofing comes in. We're a local crew that knows the difference between a quick patch and a real fix, and we've helped homeowners from the Arlington Heights downtown train station area to the streets near Camelot Park make the switch to metal. Whether you're dealing with a leaky chimney flashing or planning a full standing seam retrofit, we give you a straight answer and a written estimate.

Metal Roofing in Arlington Heights (60004)

Most of the homes we see in Arlington Heights are 1950s and 1960s ranches and Cape Cods with low-pitched roofs, often with a hip or a shallow gable. The original asphalt shingles are near the end of their life, and the flashing around chimneys and skylights is usually the first thing to go. Because the lots are flat and the soil is heavy clay, water doesn't drain away quickly, so we pay close attention to gutters and downspouts. In the older neighborhoods near Recreation Park and along Euclid Avenue, mature trees hang over the roofs, which means falling limbs and leaf debris are a constant source of trouble. We often recommend a metal roof over shingles (retrofit) for these homes because it saves the cost of tearing off the old roof and adds a layer of protection against ice dams. Our team has been working in Arlington Heights and the surrounding Chicago suburbs for years, and we know the local building department's permit process and what it takes to get a project approved quickly.

Our experience serving Arlington Heights and the Chicago area means we've seen every kind of roof problem this climate can throw at a house: heavy wet snow, freeze-thaw cycles, hail, and summer storms that send branches through shingles. We use that experience to recommend the right metal roofing system for your home, whether it's a standing seam roof that sheds snow or a stone-coated steel roof that matches the look of the original shingles.

Our services in Arlington Heights

How a Job Works in Arlington Heights

Step 1: Call us at (872) 242-4810 or fill out our online form to schedule a free on-site assessment. We'll come out to your Arlington Heights property, inspect the roof and attic, and talk through your options. You'll get a written estimate with a clear scope of work and pricing before any work begins.

Step 2: Once you approve the estimate, we'll pull the required permits from the City of Arlington Heights and schedule the work. For a metal roof over shingles, we'll prepare the existing roof, install new underlayment and flashing, and then install the metal panels. If your home is in a historic district or has HOA rules, we'll help you get the necessary approvals. We know that tight lots in older neighborhoods can make access tricky, so we plan for that ahead of time.

Step 3: After the job is done, we clean up thoroughly, haul away all debris, and do a final walkthrough with you to make sure you're satisfied. We leave your property clean and your new roof ready for whatever the Chicago weather brings.

Metal roofing in Arlington Heights is priced by the square foot, and the final cost depends on the material, the complexity of your roof, and whether we're doing a retrofit or a full tear-off. For a typical ranch home, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a metal roof over shingles at $7. Smaller jobs like leak repairs start at $450, and screw replacement starts at $750. We also offer free estimates for storm damage inspections. Call (872) 242-4810 to get a precise quote for your Arlington Heights home.

My 1960s ranch near Camelot Park has ice dams every winter. Will a metal roof fix that?
A metal roof can help, but ice dams are usually caused by warm air leaking into the attic and melting snow on the roof, which then refreezes at the eaves. We'll inspect your attic insulation and ventilation first. If those are addressed, a standing seam metal roof with proper underlayment and ice-and-water shield at the eaves will shed snow much better than shingles and reduce the chance of ice dams forming.
A storm just knocked a branch onto my roof in Arlington Heights. How fast can you respond for emergency repairs?
We offer free inspections for storm and wind damage, and we prioritize active leaks and emergency repairs. Call us at (872) 242-4810 and we'll schedule a visit as soon as possible, often within 24 to 48 hours depending on demand. We'll tarp the area if needed and give you a written estimate for the repair.
What does a typical metal roof cost for a 1,500-square-foot ranch in Arlington Heights?
For a 1,500-square-foot ranch, a basic corrugated or ribbed panel roof might start around $8,250 (at $5.50 per square foot), while a standing seam roof could start around $15,000. The exact price depends on roof pitch, number of penetrations, and whether we're doing a retrofit or a tear-off. We provide a free estimate so you know the exact cost before committing.
Do I need a permit for a metal roof in Arlington Heights, and how do I get one?
Yes, a building permit is typically required for a roof replacement or a new metal roof installation. The City of Arlington Heights website (https://www.vah.com/) has information about the building department and permit process. We can handle the permit application for you as part of our service, and we'll make sure the work meets all local code requirements.
My HOA requires approval for exterior changes. Can you help with that?
Yes, we can provide product specifications, color samples, and installation details for your HOA's architectural review. We recommend getting approval before work begins. If your home is near a property line, we also follow all setback and drainage rules to avoid issues with neighbors.
Are you insured for work on my Arlington Heights home?
Yes, we are fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Arlington Heights?
Metal roofs are low maintenance, but we recommend an annual inspection, especially after winter, to check for loose fasteners, debris buildup, and sealant wear. We offer maintenance plans and can replace screws or re-fasten panels as needed. Keeping gutters clean is also important to prevent ice dams.
Why choose us?

Trusted professionals in Chicago

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Chicago

All your work handled by qualified professionals in Chicago

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

340+ Verified Client Reviews in Chicago

⭐⭐⭐⭐⭐ 4.9/5 · 340 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Chicago · Response within 24h · No commitment · ☎ (872) 242-4810

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Chicago ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm