Serving the Chicago area  ·  (872) 242-4810  ·  Open Mon-Sun 7am-7pm
📞 (872) 242-4810 Free Quote

Metal Roofing in Naperville, IL (60540) · Local Professionals

Chicago Metal Roofing · Fast response in Naperville and the Chicago area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
🎯 Get a Free Quote 📞 (872) 242-4810
+340Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Naperville's two-story subdivision homes, many built from the 1990s through the 2020s, sit on generous lots from the Naperville Historic District out toward the Route 59 corridor, and they take a beating from hail and derecho wind that sweep across the flat Illinois prairie. If your roof is showing lifted panels, missing fasteners, or granule loss after a storm, you are not alone in 60540.

Homeowners from White Eagle to the streets near Centennial Beach call Chicago Metal Roofing because we understand how Naperville weather tests a roof. We install, repair, and replace metal roofing built for this climate, and we are fully insured with general liability and workers' compensation coverage.

Metal Roofing in Naperville (60540)

Naperville sits on the same flat glacial plain as the rest of DuPage County, with heavy clay soil that holds water after summer storms and heaves during the freeze-thaw cycles of January and February. The housing stock here is different from Chicago's bungalows: most Naperville homes are larger two-story builds with multiple roof planes, valleys, and dormers, and many sit on lots with mature maples and ash that drop limbs onto roofs during high-wind events. Hail is the dominant failure mode, denting and chipping metal shingles and stone-coated steel, while derecho winds peel back panels and separate seams. Ice dams form at the eaves on steep-pitch homes when attic heat escapes, and road-salt spray from Route 59 and I-88 accelerates corrosion on lower roof edges. Our crews are trained to work safely on the steep, cut-up rooflines common in Naperville subdivisions and to match panel profiles and colors that satisfy HOA design standards.

We have been serving Naperville and the surrounding Chicago area for years, and we know the difference between a quick patch and a repair that will hold through the next storm season.

Our services in Naperville

How a Job Works in Naperville

Step 1: Call us at (872) 242-4810 or request a free estimate online. We schedule a free on-site assessment at your Naperville property, inspect the roof, flashing, and fasteners, and give you a written scope with pricing before any work begins.

Step 2: We pull the required roofing permit through the City of Naperville and coordinate with your HOA if design review is needed. On tight subdivision lots, we stage materials in the driveway and use ladder hoists to keep access clean. Work typically runs one to three days for repairs and three to seven days for a full replacement, depending on weather and roof complexity.

Step 3: We clean the site daily, magnet-sweep for nails, and walk the roof and gutters with you at the end. We do not leave until you have seen the finished work and we have documented it for your records.

Pricing in Naperville depends on roof size, pitch, access, and the condition of the existing roof. As a ballpark, metal roof repair starts at $450, metal roof installation starts at $8 per square foot, standing seam starts at $10 per square foot, and metal roof replacement starts at $9 per square foot. Metal roof over shingles (retrofit) starts at $7 per square foot, and storm and wind damage repair includes a free inspection. Most Naperville homes fall in the 2,000 to 4,000 square foot roof range, so a full standing seam replacement often lands between $20,000 and $40,000. We give you a firm written estimate after the free inspection, and we never promise insurance coverage or waive deductibles. Call (872) 242-4810 to schedule yours.

My Naperville subdivision home has a steep, cut-up roof with multiple valleys. Can you install metal on that?
Yes. We regularly work on the complex rooflines common in Naperville subdivisions, including multi-plane roofs with valleys, dormers, and varying pitches. We measure each plane and fabricate panels to fit, and we pay close attention to valley flashing and transitions, which are the most common leak points on these roofs.
A storm just lifted panels on my roof in Naperville. How fast can you get out?
We prioritize active leaks and storm damage in Naperville and the surrounding area. Call (872) 242-4810 and we will schedule a free inspection, usually within one to two business days, and sooner for active leaks. We can often make temporary repairs the same day to prevent further water damage.
What does a metal roof cost for a typical Naperville two-story home?
Most Naperville two-story homes have roofs in the 2,000 to 4,000 square foot range. Metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and replacement at $9 per square foot. A typical standing seam job runs $20,000 to $40,000 depending on pitch, access, and panel profile. We provide a free written estimate so you know the exact cost before committing.
Do I need a permit from the City of Naperville for a metal roof replacement?
Yes, a roofing permit is commonly required for a full replacement or re-roof in Naperville, and requirements vary by project. We handle the permit application and inspections as part of the job. You can verify current rules on the City of Naperville website or by calling the building department directly.
My HOA requires design approval for a metal roof. Can you help with that?
Yes. Many Naperville subdivisions have HOA design standards for roof color and panel profile. We provide product samples and specification sheets you can submit to your HOA, and we can adjust the panel profile or color to meet the approved standards. We also respect property line setbacks and coordinate with neighbors when staging materials.
Are you fully insured for work at my Naperville property?
Yes. Chicago Metal Roofing carries general liability insurance and workers' compensation coverage for every crew member on your property.
What maintenance does a metal roof need in Naperville's climate?
In Naperville, check fasteners and seals after every major hail or wind event, clear leaves and debris from valleys and gutters each fall, and inspect flashing around chimneys and skylights annually. Ice dams can form at the eaves on steep roofs, so keep attic insulation and ventilation in good shape. We offer metal roof inspections and maintenance plans to catch small issues before they become leaks.

Nearby service areas

📍 Chicago 60601📍 Evanston 60201📍 Oak Park 60301📍 Cicero 60804
Why choose us?

Trusted professionals in Chicago

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Chicago

All your work handled by qualified professionals in Chicago

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

340+ Verified Client Reviews in Chicago

⭐⭐⭐⭐⭐ 4.9/5 · 340 verified Google reviews

Rachel S.
⭐⭐⭐⭐⭐
RS
Rachel S.
Oak Park

“Had them put a metal roof on my garden shed out back, it's only about 10x12 but they treated it like a real job. Showed up on time, finished in a day, and the standing seam panels look way nicer than the old shingles that were falling apart.”

Metal Roof Installation
Kevin R.
⭐⭐⭐⭐⭐
KR
Kevin R.
Evanston

“We had a bay window on our 1920s house with a copper roof that had gone green and was leaking into the living room. Chicago Metal Roofing replaced the copper and matched the patina perfectly, honestly the bay window looks better than it did when we bought the place. Not cheap, but worth every penny.”

Copper & Specialty Metal Roofing
Lisa H.
⭐⭐⭐⭐⭐
LH
Lisa H.
Joliet

“Our old farm barn had a rusted-out metal roof that was beyond saving, so they tore it off and installed new corrugated panels over the whole thing. Crew of four knocked it out in two days and hauled away every last scrap of the old rusted tin. The barn's dry for the first time in years.”

Metal Roof Replacement
Emily C.
⭐⭐⭐⭐
EC
Emily C.
Naperville

“Standing seam roof on our brick house, about 2,200 square feet, and the color match to the brick is exactly what we hoped for. Only gripe is they started a couple days later than quoted because of rain, but the crew was professional and the cleanup was spotless.”

Standing Seam Metal Roofing
Michelle B.
⭐⭐⭐⭐⭐
MB
Michelle B.
Cicero

“Had a nagging leak over our back bedroom every time it rained hard. They found the culprit was failing fasteners and a bad flashing detail around the chimney, fixed both, and it's been bone dry through two big storms since. Fast, fair, and no pressure to replace the whole roof.”

Metal Roof Leak Repair
Tom D.
⭐⭐⭐⭐⭐
TD
Tom D.
Chicago

“Went with the retrofit over our existing shingles instead of a full tear-off, and I'm so glad we did, saved us thousands and the house looks brand new. They added snow guards too, which I didn't even know I needed living in Chicago.”

Metal Roof Over Shingles (Retrofit)
Robert M.
⭐⭐⭐⭐⭐
RM
Robert M.
Skokie

“We manage a six-unit residential building and the old metal roof was patched together with silicone and hope. Chicago Metal Roofing did a full replacement on the whole roof and coordinated everything around our tenants without a single complaint. Relieved doesn't even cover it.”

Metal Roof Replacement
Chris A.
⭐⭐⭐⭐⭐
CA
Chris A.
Aurora

“New stone-coated steel roof on our brick house and it looks like the fancy tile roofs you see in magazines, at a fraction of the cost. Crew was in and out in three days and swept the yard with a magnet for nails, my dog's paws thank them. Would use again in a heartbeat.”

Stone-Coated Steel Roofing
Free Quote

Get Your Free Quote

Metal Roofing in Chicago · Response within 24h · No commitment · ☎ (872) 242-4810

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Chicago ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm