Serving the Chicago area  ·  (872) 242-4810  ·  Open Mon-Sun 7am-7pm
📞 (872) 242-4810 Free Quote

Metal Roofing in Berwyn, IL (60402) · Local Professionals

Chicago Metal Roofing · Fast response in Berwyn and the Chicago area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+340Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Berwyn is the kind of town where the bungalows line up block after block, and most of them still have the same low-pitch hip roofs they were built with in the 1920s. If you live near the Berwyn Route 66 Museum or along the Bungalow Belt stretch of Oak Park Avenue, you already know that these roofs take a beating from ice dams, hail, and the kind of wind that comes with a fast-moving summer storm.

We are Chicago Metal Roofing, and we work Berwyn (60402) every week. From the brick two-flats near the Berwyn Metra station to the cottages off Cermak Road, our team knows how to handle the tight lots, the mature trees, and the older roof decks that are common here. We are fully insured and we specialize in metal roofing systems that shed snow and hold up to Cook County weather.

Metal Roofing in Berwyn (60402)

Berwyn sits on the same flat glacial plain as the rest of Chicago, with heavy clay soil that does not drain quickly. That matters for roofing because ice dams form fast when snowmelt refreezes at the eaves, especially on the low-slope bungalow roofs that dominate the city. Many of these homes have just a few inches of attic space, so ventilation is poor and heat buildup makes the problem worse. We see a lot of worn asphalt shingles that are one or two layers thick, and when we do a metal roof over shingles retrofit, we check the decking and the flashing details first. The brick bungalows here often have shallow roof pitches, which means standing seam and stone-coated steel are good fits because they handle low slopes better than standard shingles. We also work on the taller Victorian and Queen Anne homes near the Berwyn Historical Society, where steep gables and turrets need custom flashing and careful panel layout.

Our crew has been installing, repairing, and replacing metal roofs across Berwyn and the surrounding Chicago neighborhoods for years. We know the local building stock, from the workers' cottages to the 1950s brick ranches, and we can recommend a metal system that matches the look of your block while giving you better performance than the old shingles.

Our services in Berwyn

How a Job Works in Berwyn

Step 1: You call us at (872) 242-4810 or fill out our online form, and we schedule a free on-site assessment. We walk the roof, check the decking, flashing, and gutters, and talk with you about what you want: a full replacement, a retrofit over existing shingles, or a repair. We give you a written estimate with clear pricing, and we answer any questions about permits or insurance paperwork.

Step 2: Once you approve the scope, we pull the required roofing permit from the City of Berwyn and schedule the work. On tight Berwyn lots, we plan where the dumpster and material deliveries will go so we do not block your neighbors' driveways or the alley. If your home is in a historic district or has HOA design rules, we help you submit the panel profile and color for approval before we order materials.

Step 3: After the install, we do a full cleanup, magnet sweep for nails, and a final walkthrough with you. We make sure the gutters are clear, the flashing is sealed, and you know how to care for the new roof. We do not leave until you are satisfied.

Pricing for metal roofing in Berwyn depends on the size and pitch of your roof, the condition of the decking, how many layers of old shingles need to come off, and access. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and a metal roof over shingles retrofit at $7 per square foot. Stone-coated steel and metal shingle systems start at $9 per square foot. For smaller jobs, metal roof repair and leak repair start at $450, screw replacement and re-fastening at $750, and flashing or chimney repair at $600. We always provide a free estimate so you can see the numbers for your specific home before you commit. Call (872) 242-4810 to set it up.

My bungalow near the Berwyn Route 66 Museum has a low-pitch roof and ice dams every winter. Will a metal roof help?
Yes. Metal roofs shed snow much better than asphalt shingles, especially on low slopes. We often recommend standing seam or stone-coated steel for Berwyn bungalows because they handle ice damming well when installed with proper underlayment and ventilation. We also check your attic insulation and intake vents, since warm air leaking into the attic is usually the root cause of ice dams.
A storm just blew some panels loose on my roof in Berwyn. How fast can you get out?
We prioritize storm and wind damage calls in Berwyn and the surrounding area. Call us at (872) 242-4810 and we will schedule an inspection as soon as possible, often within a day or two depending on demand. We can tarp or secure the area to prevent further water intrusion while we prepare a repair plan.
What does a typical metal roof replacement cost for a two-flat in Berwyn?
Most two-flats in Berwyn have roofs in the 1,200 to 1,800 square foot range. A full metal roof replacement typically starts around $9 per square foot, so you might be looking at $11,000 to $16,000 or more depending on the metal type, decking repairs, and access. We give you a free estimate with line-item pricing so you know exactly what you are paying for.
Do I need a permit from the City of Berwyn for a metal roof installation?
Yes, roofing permits are commonly required for a full replacement or re-roof in Berwyn. The rules and fees can vary, so we always recommend checking with the City of Berwyn website or calling the building department before you start. We handle the permit application for you as part of our service and make sure the work meets local code.
My neighbor and I share a property line, and I want to make sure the new roof does not cause drainage issues on their side. What should I do?
We can review your property line and drainage during the free estimate. In Berwyn, many lots are narrow and roofs drain close to the property line, so we make sure gutters and downspouts are directed away from the foundation and not onto a neighbor's lot. If you are in an HOA, we also help you get approval for the panel style and color before installation.
Are you insured for roofing work at my Berwyn home?
Yes, we are fully insured with general liability and workers' compensation coverage. That protects you and your property in case of an accident on the job.
What maintenance does a metal roof need in Berwyn's climate?
Metal roofs are low maintenance, but in Berwyn you should check the fasteners and seals once a year, especially after winter. Clear leaves and debris from the gutters and valleys, and look for any loose screws or lifted panels after a storm. We offer inspection and maintenance services, and we can replace screws or re-fasten panels if needed. Keeping the roof clean and tight will help it last decades.
Why choose us?

Trusted professionals in Chicago

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Chicago

All your work handled by qualified professionals in Chicago

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

340+ Verified Client Reviews in Chicago

⭐⭐⭐⭐⭐ 4.9/5 · 340 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Chicago · Response within 24h · No commitment · ☎ (872) 242-4810

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Chicago ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm