Serving the Chicago area  ·  (872) 242-4810  ·  Open Mon-Sun 7am-7pm
📞 (872) 242-4810 Free Quote

Metal Roofing in Aurora, IL (60505) · Local Professionals

Chicago Metal Roofing · Fast response in Aurora and the Chicago area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
🎯 Get a Free Quote 📞 (872) 242-4810
+340Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Aurora's mix of older frame homes near the Fox River and newer subdivisions out toward the Kane County line means one thing for roofs: heavy snow, ice dams, and storm wind that finds every weak fastener. If you live in 60505, you already know how fast a loose panel or a flashing gap turns into a ceiling stain.

We are Chicago Metal Roofing, and we have been installing, repairing, and replacing metal roofs across Aurora and the surrounding Chicago area for years. From the historic streets near downtown to the growing neighborhoods off Orchard Road, our insured crews handle standing seam, metal shingle, and stone-coated steel with the kind of local knowledge that only comes from working here season after season.

Metal Roofing in Aurora (60505)

Aurora sits on the Fox River, and that means a lot of our work is on older frame homes with steep gables and low-slope porch roofs that have seen decades of freeze-thaw cycles. The soil here is heavy clay, so drainage around the foundation matters as much as the roof itself, and we often find gutters that have pulled away from the fascia after a hard winter. Newer subdivisions on the west side have tighter lot lines and HOA rules, so panel profile and color choices need to be cleared before we order materials. We also see plenty of ice damming at the eaves on homes with limited attic insulation, especially on north-facing slopes that never get sun in January.

Our team has worked on everything from small bungalows near the Aurora downtown to larger two-story homes in the Orchard Valley and Stonebridge areas. We know which streets have alley access for material delivery, where the historic district review applies, and how to stage a job so your driveway stays usable. When we quote a metal roof replacement or a standing seam installation, we factor in the real conditions here: snow load, wind exposure, and the age of the existing decking.

Our services in Aurora

How a Job Works in Aurora

Step 1: You call us at (872) 242-4810 or request a free estimate online. We schedule an on-site assessment, usually within a few days, and we walk the roof with you to identify failed fasteners, separated seams, flashing gaps, or storm damage. You get a written scope and a clear price before any work begins.

Step 2: Once you approve, we pull the required roofing permit through the City of Aurora and coordinate any HOA or historic district review. Our crews arrive with materials staged for your lot, whether that means a tight driveway in a older neighborhood or a cul-de-sac in a newer subdivision. We protect landscaping, keep the site secure, and work around your schedule as much as possible.

Step 3: After installation or repair, we do a full cleanup, including magnet sweeps for nails and a final walkthrough with you. We leave your property clean and show you exactly what was done, so you know your metal roof is ready for the next Aurora winter.

Pricing for metal roofing in Aurora depends on the size and pitch of your roof, the condition of the decking, access to the site, and the material you choose. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are retrofitting over existing shingles, metal roof over shingles starts at $7 per square foot, but keep in mind that local code limits how many layers you can recover. Repairs like leak fixes or flashing work start at $450, and screw replacement or re-fastening starts at $750. For a free estimate tailored to your Aurora home, call us at (872) 242-4810.

My Aurora bungalow near the Fox River gets ice dams every winter. Will a metal roof help?
Yes, a properly installed metal roof with snow guards and good attic ventilation can reduce ice damming, but the real fix is addressing insulation and air sealing. We often recommend a combination of standing seam or stone-coated steel with snow guards and improved attic ventilation, especially on older homes with low-slope porch roofs where ice tends to build up.
A storm just blew through Aurora and lifted some panels on my roof. How fast can you respond?
We prioritize storm and wind damage calls in Aurora and the surrounding area. Call us at (872) 242-4810 and we will schedule an inspection, usually within 24 to 48 hours depending on demand. We can tarp or secure the roof if needed and provide a written repair estimate.
What does a typical metal roof replacement cost for a two-story home in Aurora?
For a typical two-story home in Aurora, a metal roof replacement often falls in the range of $9 to $14 per square foot installed, depending on the material and complexity. That means a 2,000 square foot roof could run roughly $18,000 to $28,000. Factors like steep pitch, multiple gables, and decking repairs can push the price higher. We give free estimates so you know exactly what your roof needs.
Do I need a permit from the City of Aurora for a metal roof replacement?
In most cases, yes. A full roof replacement or re-roof requires a permit from the City of Aurora, and the rules vary depending on the scope of work and whether your home is in a historic district. We handle the permit application for you and make sure the work meets local code. You can also check the City of Aurora website for general information on permits and inspections.
My HOA in Aurora has design rules. Can you help with approval for a metal roof?
Yes. We regularly work with HOAs in Aurora subdivisions and can provide material samples, color chips, and specification sheets for the approval process. We recommend getting HOA approval before ordering materials, and we can coordinate with your board to make sure the panel profile and color meet the community guidelines.
Are you insured for metal roofing work on my Aurora property?
Yes, we are fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Aurora's climate?
Metal roofs are low maintenance, but in Aurora's freeze-thaw climate we recommend an annual inspection, especially after winter. Check for loose fasteners, debris in valleys, and snow guard condition. We offer inspection and maintenance plans, and we can replace screws or re-fasten panels before small issues become leaks. Call us at (872) 242-4810 to schedule.

Nearby service areas

📍 Chicago 60601📍 Evanston 60201📍 Oak Park 60301📍 Cicero 60804
Why choose us?

Trusted professionals in Chicago

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Chicago

All your work handled by qualified professionals in Chicago

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

340+ Verified Client Reviews in Chicago

⭐⭐⭐⭐⭐ 4.9/5 · 340 verified Google reviews

Rachel S.
⭐⭐⭐⭐⭐
RS
Rachel S.
Oak Park

“Had them put a metal roof on my garden shed out back, it's only about 10x12 but they treated it like a real job. Showed up on time, finished in a day, and the standing seam panels look way nicer than the old shingles that were falling apart.”

Metal Roof Installation
Kevin R.
⭐⭐⭐⭐⭐
KR
Kevin R.
Evanston

“We had a bay window on our 1920s house with a copper roof that had gone green and was leaking into the living room. Chicago Metal Roofing replaced the copper and matched the patina perfectly, honestly the bay window looks better than it did when we bought the place. Not cheap, but worth every penny.”

Copper & Specialty Metal Roofing
Lisa H.
⭐⭐⭐⭐⭐
LH
Lisa H.
Joliet

“Our old farm barn had a rusted-out metal roof that was beyond saving, so they tore it off and installed new corrugated panels over the whole thing. Crew of four knocked it out in two days and hauled away every last scrap of the old rusted tin. The barn's dry for the first time in years.”

Metal Roof Replacement
Emily C.
⭐⭐⭐⭐
EC
Emily C.
Naperville

“Standing seam roof on our brick house, about 2,200 square feet, and the color match to the brick is exactly what we hoped for. Only gripe is they started a couple days later than quoted because of rain, but the crew was professional and the cleanup was spotless.”

Standing Seam Metal Roofing
Michelle B.
⭐⭐⭐⭐⭐
MB
Michelle B.
Cicero

“Had a nagging leak over our back bedroom every time it rained hard. They found the culprit was failing fasteners and a bad flashing detail around the chimney, fixed both, and it's been bone dry through two big storms since. Fast, fair, and no pressure to replace the whole roof.”

Metal Roof Leak Repair
Tom D.
⭐⭐⭐⭐⭐
TD
Tom D.
Chicago

“Went with the retrofit over our existing shingles instead of a full tear-off, and I'm so glad we did, saved us thousands and the house looks brand new. They added snow guards too, which I didn't even know I needed living in Chicago.”

Metal Roof Over Shingles (Retrofit)
Robert M.
⭐⭐⭐⭐⭐
RM
Robert M.
Skokie

“We manage a six-unit residential building and the old metal roof was patched together with silicone and hope. Chicago Metal Roofing did a full replacement on the whole roof and coordinated everything around our tenants without a single complaint. Relieved doesn't even cover it.”

Metal Roof Replacement
Chris A.
⭐⭐⭐⭐⭐
CA
Chris A.
Aurora

“New stone-coated steel roof on our brick house and it looks like the fancy tile roofs you see in magazines, at a fraction of the cost. Crew was in and out in three days and swept the yard with a magnet for nails, my dog's paws thank them. Would use again in a heartbeat.”

Stone-Coated Steel Roofing
Free Quote

Get Your Free Quote

Metal Roofing in Chicago · Response within 24h · No commitment · ☎ (872) 242-4810

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Chicago ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm