Serving the Chicago area  ·  (872) 242-4810  ·  Open Mon-Sun 7am-7pm
📞 (872) 242-4810 Free Quote

Metal Roofing in Evanston, IL (60201) · Local Professionals

Chicago Metal Roofing · Fast response in Evanston and the Chicago area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+340Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Evanston's lakefront Victorians and Prairie-era homes near the Northwestern campus have steep roofs, turrets, and tall trees that drop limbs on them all year. The city's mix of 1920s brick bungalows, two-flats, and grand old houses on narrow lots means every metal roofing job here has its own quirks.

Homeowners in 60201 call Chicago Metal Roofing because we know how lake-effect snow, ice dams, and summer storms punish these roofs. From the dormers on Ridge Avenue to the flat roofs near the Main Street CTA stop, we've seen what works and what doesn't.

Metal Roofing in Evanston (60201)

Evanston sits on a flat glacial plain right beside Lake Michigan, and the heavy clay soil under the city holds water after storms. That means proper drainage and flashing details matter more here than in most places. The housing stock is old and varied: you'll find Queen Anne and Victorian homes with steep gables and turrets in the Lakeshore Historic District, brick two-flats and workers' cottages with shallow pitched roofs closer to the lake, and mid-century ranches out toward the west side. Many lots are narrow with mature elms, maples, and oaks that hang over the roof, so we plan for tight access and careful staging. Insured crews handle Copper & Specialty Metal Roofing and Standing Seam Metal Roofing on these tricky roofs, from the turrets near the Evanston Art Center to the low-slope porches off Dempster Street.

We've been serving Evanston and the surrounding Chicago area for years, and we know the local building department's inspection rhythm and what the historic districts expect. Our team is fully insured with general liability and workers' compensation, so you're covered from the first day on site.

Our services in Evanston

How a Job Works in Evanston

Step 1: you call (872) 242-4810 or request a free on-site assessment. We'll walk the roof, check the attic and flashing, and talk through options, whether it's a repair, a retrofit over shingles, or a full replacement. We'll also flag any historic district or HOA design review that might apply before you commit.

Step 2: once you approve the estimate, we pull the required roofing permit from the City of Evanston and schedule the work. On tight Evanston lots, we plan material drops and dumpster placement carefully to keep neighbors happy and alleys clear. If your home is in a historic district, we coordinate with the design review process early so the panel profile and color meet local rules.

Step 3: after installation, we do a full magnetic sweep for nails, clear gutters and downspouts, and walk the property with you. We leave your yard and driveway as clean as we found them, and we don't consider the job done until you've signed off on the final walkthrough.

Metal roofing in Evanston runs from about $5.50 per square foot for corrugated and ribbed panel roofing up to $20 per square foot for copper and specialty metal. Standing seam starts around $10 per square foot, metal shingle and stone-coated steel around $9, and a retrofit over existing shingles around $7. Smaller jobs like metal roof repair or leak repair start at $450, screw replacement and re-fastening at $750, and flashing, chimney, or skylight repair at $600. Snow guards and ice protection start at $1,200, and gutters for metal roofs run about $9 per linear foot. The final price depends on roof size, pitch, access, the condition of the existing roof, and how urgent the work is. Call us at (872) 242-4810 for a free estimate and a straight answer on what your Evanston roof actually needs.

My Victorian near the lake has a turret and steep gables. Can you handle standing seam on that kind of roof?
Yes. We regularly work on Evanston's Victorian and Queen Anne homes with turrets, steep pitches, and complex valleys. Standing seam is a good fit because the panels can be curved and cut to follow turret radii, and hidden fasteners reduce leak points on those tricky transitions. We measure each facet and fabricate panels to fit, then flash the turret base and valleys carefully. It takes longer than a simple gable roof, but it's the right way to protect a home like yours.
A storm just peeled back panels on my roof in Evanston. How fast can you get out?
We treat wind-lifted panels and active leaks as priority calls. In most cases we can get an insured crew to your Evanston property within 24 to 48 hours of your call, and often same day for active leaks. We'll tarp or secure the area first to prevent more damage, then give you a written repair estimate. Call (872) 242-4810 and tell us what you're seeing.
What does a typical metal roof replacement cost for a two-flat in 60201?
For a typical Evanston two-flat with a roof around 1,500 to 2,000 square feet, a standing seam replacement usually lands between $15,000 and $22,000, while a corrugated or ribbed panel roof might run $8,000 to $12,000. Steep pitches, turrets, dormers, and tight alley access can push costs higher. We give free on-site estimates so you get a real number, not a guess.
Do I need a permit for a metal roof in Evanston, and does the historic district affect my choice of panels?
Yes, a roofing permit is commonly required for a full replacement or re-roof in Evanston, and the rules vary by project scope. If your home is in a historic district, design review can restrict panel profile and color, so it's worth checking early. The City of Evanston website has the official contact information for the building department, and we're happy to walk you through what we've seen on similar properties nearby.
My neighbor's tree hangs over my roof and I want to replace it. What if the branches cross the property line?
In Evanston, you generally have the right to trim branches that cross onto your property, but it's best to talk with your neighbor first, especially for mature trees. If your roof work requires temporary access over the line, we'll coordinate with you and your neighbor ahead of time. For HOA properties, we can provide the paperwork and specifications your board needs for approval before we start.
Are you insured for work on my Evanston home?
Yes, we are fully insured with general liability and workers' compensation coverage. That coverage protects you and your property if anything goes wrong on the job.
What maintenance should I do on a metal roof in Evanston to prevent ice dams?
Evanston's freeze-thaw cycles and lake-effect snow make ice dams a real risk at the eaves, especially on older homes with poor attic insulation. Keep gutters clear in late fall, check that downspouts discharge away from the foundation, and have us inspect fasteners and flashing each spring. If you see icicles building up or water stains in the attic, call us at (872) 242-4810 for a free inspection before small issues become leaks.
Why choose us?

Trusted professionals in Chicago

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Chicago

All your work handled by qualified professionals in Chicago

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

340+ Verified Client Reviews in Chicago

⭐⭐⭐⭐⭐ 4.9/5 · 340 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Chicago · Response within 24h · No commitment · ☎ (872) 242-4810

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Chicago ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm