Serving the Chicago area  ·  (872) 242-4810  ·  Open Mon-Sun 7am-7pm
📞 (872) 242-4810 Free Quote

Metal Roofing in Orland Park, IL (60467) · Local Professionals

Chicago Metal Roofing · Fast response in Orland Park and the Chicago area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+340Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Orland Park is a town of big lots and big roofs, where 1990s and 2000s two-story subdivision homes sit on wide, open parcels that catch every bit of prairie wind and hail. If you live near the Orland Park Village Center or out by the 179th Street corridor, you know the drill: one good summer storm can peel back a ridge cap or send a limb through a panel. That is why so many homeowners here are switching to metal, and why they call us when they want it done right.

Chicago Metal Roofing is based in Chicago and works Orland Park and the surrounding suburbs every week. We know the housing stock out here, from the brick ranches off La Grange Road to the newer stone-coated steel roofs going up in the subdivisions near Centennial Park. When you need a roof that sheds snow, shrugs off hail, and holds up to open-prairie wind, we are the crew to call at (872) 242-4810.

Metal Roofing in Orland Park (60467)

Orland Park sits on flat glacial plain ground with heavy clay soil, and that matters more than most homeowners realize. On large lots with mature trees, drainage away from the foundation can be slow, so we pay close attention to gutter sizing and downspout placement when we install a metal roof. The housing stock is mostly 1990s to 2020s two-story subdivision homes with steep gables and complex rooflines, plus older brick ranches and Cape Cods closer to the village center. Those steep pitches and multiple valleys are where wind-driven rain and ice dams do their damage. We also see a lot of hail bruising on asphalt shingles after summer storms, which is one reason stone-coated steel and standing seam have become popular here. Our crews are fully insured and handle everything from a single leak repair to a full replacement with snow guards and ice protection.

We have been serving Orland Park and the Chicago area for years, and we know how to work with the local building department and HOA design review boards. Whether your home is in a gated community off 159th Street or a quiet cul-de-sac near the Metra station, we bring the same attention to detail.

Our services in Orland Park

How a Job Works in Orland Park

Step 1: You call us at (872) 242-4810 or request a free estimate online. We schedule an on-site assessment at your Orland Park property, usually within a few days. We inspect the roof, check the attic and flashing, and talk with you about what we find. You get a written estimate with clear pricing before any work begins.

Step 2: Once you approve, we pull the required permits from the local building department and coordinate with your HOA if needed. On installation day, our crew arrives with the materials and gets to work. Orland Park lots are generally spacious, which helps with staging, but we always protect your landscaping and keep the site tidy. We handle everything from tear-off to final flashing and snow guard installation.

Step 3: When the job is done, we walk the property with you, clean up every nail and scrap, and make sure you are satisfied. We do not leave until your yard is as clean as we found it. We also provide documentation for your insurance claim if storm damage was involved.

Pricing for metal roofing in Orland Park depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, and metal roof replacement at $9. If you are retrofitting over existing shingles, that starts at $7 per square foot. Repairs start at $450, and screw replacement or re-fastening starts at $750. Stone-coated steel and metal shingle roofing both start at $9 per square foot, while copper and specialty metals start at $20. We always provide a free estimate so you know exactly what your project will cost. Call (872) 242-4810 to schedule yours.

My Orland Park subdivision has a steep, complex roofline with multiple valleys. Is metal roofing a good fit?
Yes, and it is actually a great fit. Steep pitches shed snow and rain quickly, and metal panels can be custom-formed to fit valleys and transitions. We measure your roof carefully and fabricate panels to minimize seams, which reduces leak points. Many homeowners in Orland Park with complex rooflines choose standing seam for this reason.
A storm just knocked limbs onto my roof in Orland Park. How fast can you respond?
We offer free inspections for storm and wind damage and prioritize emergency calls in Orland Park. Call us at (872) 242-4810, and we will schedule an inspection as soon as possible, often within 24 to 48 hours. We can tarp active leaks and provide a detailed damage report for your insurance claim.
What is the typical cost for a metal roof replacement on a 2,000-square-foot home in Orland Park?
For a 2,000-square-foot home, a standard metal roof replacement might range from $18,000 to $24,000, depending on the material and roof complexity. Stone-coated steel or metal shingle roofs typically fall in that range. We provide a free estimate with exact pricing after inspecting your roof.
Do I need a permit for a metal roof in Orland Park, and how do I get one?
Yes, roofing permits are generally required for a full replacement or re-roof in Orland Park. The Village of Orland Park Building Department handles permits, and requirements vary. We can guide you through the process and often pull the permit on your behalf. For official details, visit the City of Orland Park website at https://www.orlandpark.org/.
My HOA requires approval for exterior changes. Can you help with the design review for a metal roof?
Absolutely. We work with HOA design review boards regularly and can provide material samples, color chips, and specifications to help get your metal roof approved. We will coordinate with your HOA to ensure the panel profile and color meet the community guidelines.
Are you fully insured for work at my Orland Park property?
Yes, Chicago Metal Roofing is fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Orland Park's climate?
Metal roofs are low maintenance, but in Orland Park's freeze-thaw cycles and summer storms, we recommend an annual inspection. Check for loose fasteners, debris in valleys, and snow guard condition before winter. We offer maintenance plans and can inspect your roof for free.
Why choose us?

Trusted professionals in Chicago

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Chicago

All your work handled by qualified professionals in Chicago

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

340+ Verified Client Reviews in Chicago

⭐⭐⭐⭐⭐ 4.9/5 · 340 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Chicago · Response within 24h · No commitment · ☎ (872) 242-4810

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Chicago ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm